Free shipping for purchases of 10,000 yen or more. Soldering service started!



MiniAxe

Regular price ¥10,000

Tax included. Shipping calculated at checkout.

About Variations

MiniAxe is available in the following three colors for the top and bottom plates.

  • Clear
  • Black
  • Red

This kit requires all the components to be soldered, but if you purchase this kit together with the "Soldering Service", you will receive the kit with all the surface mount components soldered and the firmware written, although it will take a little time.

What is MiniAxe?

MiniAxe is a compact keyboard with 36 keys for practical use. It has the following features.

  • Split
  • Ortholinear
  • No ProMicro
  • No matrix diodes
  • All parts are surface mount device
  • Using USB OTG cable between the left/right keyboards

It is a little hard to complete and use it, but I think you can feel a sense of accomplishment and satisfaction.

Notes

  • This is a kit where all the parts are soldered and assembled. Difficulty level is a little high.
  • Some parts need to be purchased separately in order to complete the project. See here for details.
  • This kit is compatible with Cherry MX compatible keyswitches only (Kailh low profile keyswitch compatible version is here).

Parts required separately

In order to complete the kit, you need to prepare the following parts separately.

  • Cherry MX compatible key switch
  • Key cap
  • Micro USB cable (For connecting to PC)

To purchase key switches and key caps, the following sites are recommended in Japan.

How to build

Please refer to how to build on the following pages.

If you have any questions, please contact us.

Kit includes

This kit includes the following parts.

  • 2 PCBs
  • 5 Resistances (10 kΩ)
  • 5 Resistances (22 Ω)
  • 5 Capacitors (1 μF)
  • 3 Capacitors (0.1 μF)
  • 5 Capacitors (22 pF)
  • 2 Schottky diodes
  • 2 Crystal oscillators (16 MHz)
  • 2 MPUs (ATMEGA32U4)
  • 4 USB connectors (Micro B female)
  • 2 Tact switches
  • 36 Switch sockets
  • 8 M2 screws (8 mm)
  • 8 M2 screws (4 mm)
  • 8 M2 resin spacer (3 mm)
  • 8 M2 metal spacer (3.5 mm)
  • 2 Top plate
  • 2 Bottom plate
  • 10 rubber feets
  • 1 USB Micro b - Micro b cable

MiniAxe Soldering Service

Only surface mount components are to be soldered.

Firmware is already written.

After delivery, you will need to do the following

  • Screw in the plate
  • Installation of the keyswitch (not included in the kit)
  • Installation of the key cap (not included in the kit)

 

The picture is a sample and not the same as the product. Specifications are subject to change without notice.